www.nerotapware.com.au
3.Screw shower bracket body
on to outlet. DO NOT OVERTIGHTEN.
1.Apply thread sealant or
teflon tape on outlet thread.
2.Pull back plate on together
with bracket body.
Apply thread sealant
or teflon tape
rubber
wahser
rubber
wahser
G1/2
Slide the back plate against the
wall/tile face properly.
4. Connect bracket and hand shower with hose.
TEST & CHECK FOR LEAKS.
All products must be installed by licensed plumbers.
All pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
Important