0
2
N
E
R
I
&
H
U
ASSEMBLY INSTRUCTIONS CONTINUED
TRUNK TALL CABINET
IMPORTANT! ALWAYS USE GLOVES WHEN HANDLING BRASS PRODUCTS.
Our brass is uncoated to embrace the natural patina that will
develop over time. Never handle brass with your bare hands, as
the oils in your skin will cause the surface to oxidise more
quickly in the areas you touch, highlighting your finger prints.
If you ordered your product in brass, you will find white gloves
in the supplied hardware box.
INSTRUCTIONS
1) ASSEMBLE METAL FRAME
a) Unpack components and lay them out so they are in the
correct orientation.
b) Assemble the frame by aligning the holes in the
corresponding parts, inserting the relevant screws into each,
and tightening with an Allen Key. Use 2x M8x25 Socket Cap
Screws for the uppermost part of the frame, and 4x M8x10 Socket
Cap Screws for the base of the frame.
IMPORTANT: While you work, use the G-clamps to align the
components at the uppermost part of the frame (as shown below).
It is important to use G-clamps with an appropriate barrier
material to protect the brass.
SALES@
DE
LA
ESP
AD
A.C
OM
DE
LA
ES
PA
DA
.C
OM
