USER GUIDE
USER GUIDE
Nera WorldPro 1000/1010
23
USER GUIDE
23
OPERATION
cont
’
d
USER GUIDE
USER GUIDE
First time setting up
1
Power on terminal by pressing Activate for
1.5 seconds:
• All indicators light
GREEN
for approx. 15 seconds.
• Buzzer in antenna beeps slowly,
Signal
indicator
blinks
RED
(
YELLOW
if old GPS fix is stored in
terminal).
The terminal is automatically set in
Antenna
Point-
ing
mode, i.e. it attempts to find the Inmarsat BGAN
satellite and/or to obtain a GPS fix which is needed to
log onto the BGAN network.
2
Obtaining a new GPS fix (if not using old/stored fix):
• Place the terminal in a location outdoor or inside a
window.
• Wait until the
Signal
indicator lights
GREEN
, GPS
fix is obtained.
• If the terminal is new, or have not been used for
some time, a GPS fix may take up to 5 minutes.
• Nera WorldPro only attempts to obtain a GPS fix the
first 20 minutes after power on. If no fix is obtained,
power off and start again from step
1
.
A GPS fix is required for logging onto the Inmarsat system.
3
Find the best signal:
• Align the antenna for the best possible satellite
signal at your location.
• Use the buzzer pitch and the
GREEN
blinking
Signal
indicator,
see also
Antenna pointing
.
Use the buzzer pitch and the
GREEN
blinking
Signal
indicator. The buzzer pitch increases as the
satellite signal improves
.
A good satellite signal is
necessary to obtain a stable network connection.
Alternatively, the Nera WorldSet or BGAN LaunchPad
can be used as an aid in pointing the Nera
WorldPro.
4
Logging on:
• When the
Signal
indicator blinks
GREEN
and
the buzzer pitch is as high as you can get it, press
Activate
to log automatically onto the
Inmarsat
BGAN
network and exit
Antenna Pointing
mode.
5
Start communications:
• When the
Signal
indicator lights steadily
GREEN
,
you have successfully logged on and can start mak-
ing voice calls, send SMS or set up a data connection
on your PC.
If the
Signal
indicator switches to
RED
, your
logon attempt has failed.
Press
Activate
for 1.5 sec to power off the termi-
nal, and start again from step
1
.
��������
�������
������
����������
������
��������� �������
��������
�������
Содержание WorldPro1000
