Neptune E-CODER) R450i, Руководство по установке и обслуживанию

Страница: 24 / 40

4. When the collector receives the configuration packet, the host sends an email or Short
Message Service (SMS) confirmation to allow verification of proper installation and
E-CODER)R450
i location. The following is an example of the email text.
The subject line of the email provides a quick summary of the detailed information which is
included. The following table provides a breakdown of the email highlights.
Value Description
1224 Last four digits of MIU ID.
G
Valid read. The three types of reads are:
l
G – Valid read.
l
B – Bad read.
l
N – No register.
–89 R450 DC Received Signal Strength Indicator (RSSI).
US 29 Data Collector Name.
Table 4 – Config Email Breakdown
RSSI Values and R450™ System Capabilities
Signal Strength (RSSI values) is a key indicator of the R450 system health as well as the
communication capabilities of the E-CODER)R450
i to and from the R450 DC.
These values are associated with the Uplink, the ability of the R450 DC to hear reading
information from the E-CODER)R450
i , and Downlink, the ability of the E-CODER)R450 i to
hear instructions from the R450 DC.
12
E-CODER
®
)R450
i™
Installation and Maintenance Guide
Chapter 5: Activating and Testing the E-CODER ® )R450
i
™