17
Tip:
Correct bungee tension is achieved when enough recoil is pre-
sent for the Rowing Handle to easily reach the front of the Rower Pulley
Belt Bracket at the far front of the frame. If the Rowing Handle will not
reach rearward to the end of the Seat Rail, the Bungee Cord is over-
tightened and will require adjustment.
Replacing the Bungee Shock Cord
Reinstall the Shock Cord through the Upper Frame, along the opposite side of Idle
Wheel, through the Mid Frame and Lower Bungee Pulleys and then tie off with
plastic tie wrap to correct tension. Replace Frame Plug
Bungee
Shock
Cord
Bungee Attachment
Point
Pull Bungee
through until
seated securely
