Neptune ARB R900, Руководство пользователя

Страница: 27 / 37

Selecting the R900 BCT Reading Mode
To choose the reading mode, complete the following steps.
1. On the Nomad, click .
2. Click
5
– UTILS .
3. Click
8
– Belt Clip Status .
The R900 BCT Status screen appears.
4. Tap the drop-down selection list for RF Mode and you can choose the reading
mode. See the modes listed in "RF Performance Modes" on the previous page.
Using the R900 BCT RF Test Mode
RF Test Mode allows the R900 BCT to go into a continuous receive mode and listens for
any and all R900 transmissions.
From the Login Screen
To access RF Test Mode from the Login screen, complete the following steps.
1. On the Nomad, click .
2. Click
5
– UTILS .
3. Click
7
– RF Test .
The RF Test Mode screen appears as illustrated
in Figure 4.
Figure 4 – R900 BCT RF Mode Screen
14 R900 Belt Clip Transceiver User's Manual
Setting Up the R900 Belt Clip Transceiver