Neptune 13458-000, Руководство по установке и обслуживанию

Страница: 65 / 150

Figure 56 – Gateway Pole Hardware
1. Mount the Gateway to pole using two stainless steel
clamps. See Figure 56.
The pole/wall mounting bracket is included with the Gateway.
Contact your Neptune sales representative to order the
stainless steel clamps for mounting the Gateway to a pole.
Figure 57 – Slot on Mounting Bracket
2. Insert the clamps through the slots on the mounting
bracket. See Figure 57.
Mounting the Battery Box to a Large Pole
Mount the battery box to a 5-inch to 16-inch (12.7 to 40.64 cm)
diameter pole by completing the following steps.
Figure 58 – Battery Box Clamps
1. Open the battery box, and make sure the breakers are in
the OFF position. See Figure 36 – page 33.
2. Mount the battery box to a large pole. However, use the
stainless steel clamps as shown in Figure 58.
R900 Gateway Installation and Maintenance Guide 47
Chapter 4: Installation of the Gateway