Actuators
Specification & Installation Instructions
TM-RM-210819
1
Technical Data
TM000
TM020
TM060
TM080
RM000
RM020
RM060
RM080
Power supply
28 to 32 Vdc or 22 to 26 Vac
Power consumption
8 VA
30 VA Peak, 8VA
10 VA
30 VA Peak, 10VA
Torque
180 in.lb. [20 Nm] at rated voltage
360 in.lb. [40 Nm] at rated voltage
Running time through 90º
60 to 85 sec torque dependant
Fail safe - Enerdrive
No
Yes
No
Yes
Feedback
4 to 20 mA or 2 to 10 Vdc adjustable
Auxiliary switches
No
Yes (2)
No
Yes (2)
No
Yes (2)
No
Yes (2)
Electrical connection
18 AWG [0.8 mm
2
] minimum
Inlet bushing
2 inlet bushing of 7/8 in [22.2 mm]
Control signal
Analog, Digital or Pulse with modulation (PWM) programmable (factory set with Analog control signal)
Angle of rotation
0 to 90 degrees, electronically adjustable (factory set with 90º stroke)
Direction of rotation
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
Operating temperature
0ºF to 122ºF [-18º C to 50ºC]
Storage temperature
-22ºF to 122ºF [-30º C to 50ºC]
Relative Humidity
5 to 95 % non condensing
Weight
4.5 lbs. [2 kg]
7 lbs. [3.2 kg]
Warning: Do not press the clutch when actuator is powered
Dimensions
Dimension
Imperial (in) Metric (mm)
A
5.20
132.1
B
1.33
33.8
C
9.13
231.9
D
3.55
90.2
Caution
We strongly recommend that all Neptronic
®
products be wired to a separate transformer and that transformer shall service only Neptronic
®
products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System
U.S.A. Patent #5,278,454
Features:
•
Clutch for manual adjustments
•
Maintenance free
•
Position indicator
•
Control signal fully programmable
•
Fail safe by
Enerdrive System
1
(on model 060 & 080)
•
Auxiliary switches
(on model 020 & 080)
TM000
TM020
TM060
TM080
RM000
RM020
RM060
RM080
