Actuator
Specification & Installation instructions
BTF-210802
1
Technical Data
BT000F
BT060F
BT020F
BT080F
BBTF1000A
BBTF1060A
BBTF1021A
BBTF1080A
Fail safe - Enerdrive
No
Yes
No
Yes
Power consumption
15 VA
24VA Peak, 15VA
15 VA
24VA Peak, 15VA
Control signal
3 wire / 2 position,
3 wire / 3 point floating
2 wire / 2 position,
4 wire / 3 point floating
3 wire / 2 position,
3 wire / 3 point floating
2 wire / 2 position,
4 wire / 3 point floating
Auxiliary switches
No
Yes (2)
Ingress protection
IP22 equivalent to Nema type 2,
IP54 equivalent to Nema type 3R if water tight inlet
bushings (not supplied NEP617) are installed
IP22 equivalent to Nema type 2
Running time through
90º
6 to 8 sec Torque dependant
Torque
50 in.lb. [5,6 Nm] at rated voltage
Power supply
22 to 26 VAC or 28 to 32 VDC
Electrical connection
18 AWG [0.8 mm
2
] minimum
Inlet bushing
2 inlet bushing of 13/16 in [20.6 mm]
Angle of rotation
0 to 90 degrees, mechanically adjustable (factory set with 90º stroke)
Direction of rotation
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
Ambient temperature
-22ºF to +122ºF [-30ºC to +50ºC]
Storage temperature
-22ºF to +122ºF [-30ºC to +50ºC]
Relative Humidity
5 to 95 % non condensing.
Weight
3 lbs. [1.4 kg]
Warning: Do not press the clutch when actuator is powered
Dimensions
Dimension
Inches
Metric (mm)
A
1.50
38.1
B
3.64
92.5
C
6.60
167.5
D
model 000 & 060
3.02
76.8
model 020 & 080
3.81
96.8
Caution
We strongly recommend that all neptronic® products be wired to a separate transformer and that transformer shall service only neptronic® products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System
U.S.A. Patent #5,278,454
Feature:
•
Mounts easy on round
& square shaft (with option
–8).
•
External clutch for manual adjustments.
•
Maintenance free.
•
Position indicator.
•
Fail safe by
Enerdrive System
1
(on model 060 & 080).
•
Auxiliary switches
(on model 020 & 080).
Old Number
BBTF1000A
BT000F
BBTF1021A
BT020F
BBTF1060A
BT060F
BBTF1080A
BT080F
