// NEOX
PacketRaven
QUICK USER GUIDE
Depending on the configuration of the TAP speed
(see section 6.3)
the LEDs light up in different combinations.
It must be ensured that all devices connected to the NETWORK port are set to the same network speed when
configuring the TAP speed.
This is the only way to ensure smooth and transparent operation of the TAP. As soon as the TAP displays the
desired or configured link speed via the LEDs, proper operation of the TAP is ensured.
4.1 Front View - Meaning of the LEDs
(C)
RJ45 Network Port and Status LEDs
(see section 4.1)
(D)
2 Power LEDs for AC/DC 5V
(see section 5.)
It is possible to connect up to 2 power supply units to ensure power supply redundancy.
(E)
RJ45 Monitoring Port and Status LEDs
(see section 4.1)
(F)
DC Power LED for 12-48V DC
(see section 5.)
If power is supplied via the 12-48V DC connection, this LED lights up.
(G)
Aggregation Mode LED
(see section 6.2)
If the Aggregation mode is activated instead of the standard Breakout mode, this LED lights up.
(A)
Power over Ethernet (PoE+) LED
If PoE voltage is fed in via the connected net
work device, this LED lights up.
(B)
Link Loss Detection (LLD) LED
(see section 4.1)
:
LLD detects a non-existent link on one of its net
work ports and then shuts down the other net
work port.
This state is indicated by the LLD LED lighting
up.
4. Front View - Ports and LEDs
For reasons of compatibility and EMC protection, our TAPS may only be operated with the supplied power
supplies certified together with the TAP. If the TAP is nevertheless operated with power supplies other
than those supplied, any warranty claim granted for the TAP will be voided!
(A)
DIP switch for LLD on/off, TAP mode and speed
(see section 6.)
(B)
Connection for 12-48V DC voltage.
The polarity at the DC connection does not matter, as the TAP
automatically detects the live line and passes the power supply
to the TAP accordingly in the required form!
(C)
Redundant connections for AC/DC power supplies (5V)
5. Back View
NETWORK and MONITOR Port
=
10M
NETWORK and MONITOR Port
=
100M
NETWORK and MONITOR Port
=
1G
