background image

5.3.2 

Stopping domestic hot water production

1. Turn the setting button 

 all the way to the left until       is dis­

played. 

Note

Frost protection continues to run on the domestic hot water tank.

The venting cycle is not tripped when domestic hot water produc­

tion is shut down.

5.3.3 

Shutting down the installation

It is recommended that the boiler is kept powered on to ensure frost pro­

tection.

5.4 

Frost Protection

Caution

The frost protection function does not work if the boiler is powered 

off.

Caution

The integrated protection system only protects the boiler, not the 

heating installation

Caution

Have the boiler and heating system drained by a qualified profes­

sional if the home is left empty for a long period of time and there 

is a chance of frost.

Important

To prevent the radiators and the installation from freezing in pla­

ces where that risk exists (e.g. in a garage or an equipment room), 

we recommend the connection of an outside temperature sensor 

to the boiler.

If the temperature of the water in the boiler falls too much, the integrated 

protection device switches itself on. This device functions as follows:

If the water temperature is lower than 7°C, the circulation pump starts 

up.

If the water temperature is lower than 4°C, the boiler starts up.

If the water temperature is higher than 10°C, the boiler shuts down and 

the circulation pump continues to run for a short time.

Fig.19

MW

-3

0

0

0

2

4

2

-2

5  Utilisation with the control panel B-Control

7626252 - v02 - 17102016

EF

17

Содержание EF 22









































Отзывы: