7 Control panel settings B-Control
7.1
List of parameters
7.1.1
Information menu
Tab.5
Information list
Information
Description
Display
°C
Heating water temperature (°C)
The symbol
flashes
°C
Domestic hot water temperature (°C)
The symbol
flashes
If no domestic hot water sensor connected: dis
play — — —
°C
Outdoor temperature (°C)
The symbol
flashes.
Burner status
0 = burner off
100 = burner on
Energy meter on the heating water circuit
The symbol
and the value flash
The value in kW (
) is displayed alternate
ly with the value in MW (
).
Example: for 12560 kW,
will display al
ternating with
Energy meter on the domestic hot water circuit
The symbol
and the value flash
The value in kW (
) is displayed alternate
ly with the value in MW (
).
Example: for 12560 kW,
will display al
ternating with
Not available
For more information, see
Browsing in the menus, page 19
7.2
Setting the parameters
7.2.1
Setting the heating water temperature
No temperature sensor connected
Outside temperature sensor con
nected
Set the heating water temperature
setpoint
Set the required room temperature
1. Set the temperature setpoint or room temperature depending on the
configuration described above by turning the setting button
.
Important
If the heating water temperature setpoint is lower than 16°C and if
no outside temperature sensor is connected, the heating cuts out
automatically.
Important
This setting is possible regardless of the display.
Fig.34
MW-3000243-3
7 Control panel settings B-Control
7719764 - v02 - 16112018
EFU-S
23
