PCIe-PoE2+/PCIe-PoE4+ User’s Manual
Chapter 3 Getting
Start
3.1
Install the PCIe-PoE2+ Frame Grabber Card
PCIe-PoE2+ utilizes the x4 PCI Express bus to communicate with the host computer.
Before you install the PCIe-PoE2+, please make sure that there is a x4 PCI Express slot
available on your host computer.
Note
Most modern computers have x16 PCI Express slot(s) for installing a graphics card. It can
be possibly configured as a PCI Express Root Port for installing a general PCI Express card.
Please contact the vendor of your computer to check if PCIe-PoE2+ can be fitted into your
x16 PCI Express slot.
You can install the PCIe-PoE2+ frame grabber card by following the steps listed below.
1. Open the chassis of the host computer and expose the x4 PCI Express slot (or a
compatible x16 PCI Express slot).
2. Align and insert the goldfinger of PCIe-PoE2+ into the PCI Express slot until it’s firmly
contacted.
Copyright © 2012 Neousys Technology Inc. All Right Reserved.
Page 8 of 22
