Neousys Technology PB- 2500J-CSM, Руководство пользователя

Страница: 34 / 44

PB-2500J-PCIe/ CSM
34
4.2 PB-2500J Parameter Configurer
Item Description
F/W Version Shows the firmware version of your PB-2500J
DC Voltage Shows the current input voltage of your PB-2500J
CAP Energy Shows the current charged energy status (rated 2500Ws Max.)
P
a
ra
met
e
r
C
o
n
figu
re
r
Auto-start _ seconds after DC
applied
The time delay (in seconds) to start PB-2500J once your computer has
been powered on.
Behavior for DC Loss (<9V)
This allows you to set the delay time (in seconds) to shutdown when DC
voltage drops below 9V.
Shutdown at Low Voltage
This allows you set the low voltage limit and delay time (in seconds) to
shutdown (Note: DO NOT set voltage lower than 10V)
Shutdown at High Voltage
This allows you set the high voltage limit and delay time (in seconds) to
shutdown (Note: DO NOT set voltage higher than 32V)
SuperCAP Lifetime Extension
This setting allows you to extend the lifespan of the Supercapacitors on
your PB-2500J. Lifespan extension settings are approximate figures and
may not exactly reflect real world applications.
Parameter Control
Update Parameters : Click on this button for new parameters to take effect.
Get Parameters : Click on this button to acquire current parameters.
Load Default : Clicking on this button to load default parameters.
Shutdown Control
Re-train : This button will re-train PB-2500J to be customized to the
system
’
s required shutdown time.
Reset : This button will reset (erase) previous Re-train shutdown settings.