Neousys Technology Nuvo-5501 Series, Руководство пользователя, Страница: 38 / 92

Nuvo-5501 Series
38
3 System Installation
Before disassembling the system enclosure and installing components and modules,
please make sure you have done the following:

It is recommended that only qualified service personnel should install and
service this product to avoid injury or damage to the system.

Please observe all ESD procedures at all times to avoid damaging the
equipment.

Before disassembling your system, please make sure the system has powered
off, all cables and antennae (power, video, data, etc.) are disconnected.

Place the system on a flat and sturdy surface (remove from mounts or out of
server cabinets) before proceeding with the installation/ replacement procedure.
3.1 Disassembling the System
To access system internal components, the system needs to be disassembled. To
disassemble the system enclosure, you need to remove screws on the I/O panel,
removable and side panel.
1. On the I/O panel side, unscrew the three (3) screws shown below.