Nuvo-2500 Series User’s Manual
Copyright © 2015 Neousys Technology Inc. All Right Reserved.
Page 66 of 154
3.4 Install a DDR3L SODIMM Module
Nuvo-2500 Series provides one 204-pin, SODIMM socket for installing 1.35V DDR3L
memory module. You can install/replace the memory modules according to the following
the steps.
NOTE
Installing incorrect memory module might damage the system or result in system failure. Please make
sure you're installing a 1.35V DDR3L SODIMM module.
1. Refer to the section “
Disassemble the Cassette
” to remove the cassette if any.
2. Refer to the section "
Remove the Back Cover
" to remove the back cover.
3. Find the memory module socket as shown in
Figure 23
.
4. Tile the memory module and insert it to the socket. As it's firmly contacted with socket
connectors, press it down till the clamps of the socket snap into the latching position of
the memory module.
Figure 48: Install the Memory Module
