www.neostar.de
Figure 2-1 Remove the Bubble
DAY/NIGHT
1. MODE
AUTO
2. D TO N
63
3. N TO D
63
4. DELAY TIME
20
5. RETURN
RET
AWB
1. MODE
AUTO
2. R-G GAIN
255
3. B-G GAIN
151
4. RETURN
RET
5.
Adjust the surveillance angle.
1). Loosen No.3 adjusting screw to adjust the
panning position (0° ~ 360°).
2). Tighten No.3 adjusting screw.
3). Loosen the No.2 adjusting screw to adjust the
tilting position (0° ~ 90°).
4). Tighten No.2 adjusting screw.
5). Loosen No.1 adjusting screw to adjust the
azimuth angle of the image (0° ~ 360°).
6). Tighten No.1 adjusting screw.
1.
Drill the screw holes on the wall according to
the supplied drill template.
2.
Attach the wall mount to the wall and tighten
the screws to fix it.
Figure 2-3 3-axis Adjustment
Figure 2-4 Disassemble Mounting Plate
Figure 2-5 Drill Template & Install Mount
Figure 2-8 Angle Adjustment
Figure 2-7 Fix the Camera
Figure 2-6 Screw the Mounting Plate
Figure 2-1 Remove the Bubble
Figure 3-5 EFFECT
Figure 2-1 Bubble
2.2 w
all
m
oUNtiNg
For
t
yPe
iii c
amera
s
tePs
:
1.
Wiggle the mounting plate to disassemble it
from the wall mount.
4.
Screw the mounting plate onto the camera.
5.
Fix the camera to the wall mount with the
supplied screws.
5.
Adjust the surveillance angle.
1). Loosen No.1 adjusting screw to adjust the
pan position (0° ~ 360°).
2). Tighten No.1 adjusting screw.
3). Loosen No.2 adjusting screw to adjust the
tilting position(0° ~ 90°).
4). Tighten No.2 adjusting screw.
3. MENU OPERATION
Mounting Plate
Mounting Plate
1
2
360
90
Menu
AE
AWB
DAY&NIGHT
SYSTEM
SPECIAL
EFFECT
DC
ESC
HOLD
FRAME
RATE
AUTO
USER
HOLD
8000K
6000K
COLOR
B/W
AUTO
CAMERA
ID
ID DISP
PRIVACY
ZONE
MOTION
HLC
LAUGUAGE
COLOR
GAIN
COLOR
HUE
SHARPNESS
EXIT
VIDEO.
OUT
4200K
3200K
CONTRAST
BRIGHT
MIRROR
FLIP
NAME
DISP
FACTORY
INIT
3.1 video.oUt
You can set the frame rate as 25 fps/30fps.
3.2 day/NigHt
Color, B/W, AUTO and EXT are selectable for DAY/ NIGHT
switches. Under the mode of the AUTO and EXT, you can
set the IR LED as Smart and CDS. If the IR LED is selected
as Smart, you can set the brightness of the IR LED.
3.3.3 awB
Auto, User, Push, 8000k, 6000k, 4200k and 3000k are
selectable for AWB. Under the mode of AUTO, you
need to set the R-G/B-G Gain and to select an indoor/
outdoor mode. If the AWB mode is select as User, You
need to set the R/G/B Gain manually.
3.3.4 ae
You can set the AE mode as HOLD, DC and ESC.
Brightness:
Brightness refers to the brightness of the
image.
Shutter:
Shutter denotes the speed of the shutter.
You can set the shutter as AUTO, 1/25, 1/30, 1/50, 1/60,
1/100, 1/120, 1/250, 1/500, 1/1k, 1/3k and 1/10k.
Flicker: You can set the flicker status as 50HZ/60HZ to
prevent image flicking.
BLC:
BLC bases on the back area to enhance the
brightness of the whole image. You can set the BLC
gain from 0 to 16.
AGC:
AGC optimizes the clarity of image in poor light
scene. The value of AGC can be set from 1-5.
LSC:
LSC corrects the phenomenon where theimage
gets darkened or blurred on the periphery.
3.3.5 sPecial
Motion:
Set the Motion status as ON or OFF. Set the
SENSITIVITY from 0 to 255. Set the alarm status as ICON/
TRANCE/OFF. Set the hold time from 0 second to 255
seconds.
HLC:
HLC supplements the brightness of the peripheral
area of the image. You can set the mask value and
threshold from 0 to 255.
3.3.6 eFFect
Color Gain:
Color gain adjust this feature to change
the saturation of the color. You can set the value from
0 to 255.
Color Hue:
You can adjust the image HUE from 0 to
71.
Sharpness:
Sharpness determines the amount of
detail that an imaging system can reproduce. You can
set the value from 0 to 255.
Contrast:
Contrast enhances the difference in color
and light between parts of an image. You can set the
value from 0 to 255.
Bright Off.:
Bright Off. refers to the brightness
compensation of the image. You can set the bright
compensation value as 0 or 1.
Mirror:
You can set the Mirror status as ON/OFF.
Flip:
You can set the FLIP status as ON/OFF.
3.3.7 system
EFFECT
1. COLOR GAIN
200
2. COLOR HUE
200
3. SHARPNESS
25
4. CONTRAST
150
5. BRIGHT OFF.
1
6. MIRROR
ON
7. FLIP
ON
8. RETURN
RET
SPECIAL
1. PRIVACY
ZONE
2. MOTION
3. HLC
4. RETURN
RET
Figure 2-1 Remove the Bubble
Privacy zone: Select a PRIVACY area. Set the MASK PAT as
OFF, GRAY, WHITE or BLACK. Set the SX/EX/SY/EY value
to define the position and size of the area.
SYSTEM
1. CAMERA ID
255
2. ID DISP.
ON
3. NAME DISP.
ON
4. LANGUAGE
ENG
5. FACTORY INIT
OFF
6. RETURN
RET
Figure 3-6 SYSTEM
You can set the camera ID from 0 to 255. Select the ID
display and name display status as ON/OFF.
Chinese and English are selectable for the language of
the menu.
You can restore the camera to the default by setting the
factory initialization status as ON.
3.3.8 eXit
Exit and Save & exit are selectable.