Neostar Electronics M947015, Инструкция по эксплуатации

Страница: 10 / 14

SAEFETY FEATURES
9
POWER FAILURE
Once the power is restored a=er a power failure, the appliance will automa6cally restart
at the selected sejngs prior to the power failure.
TURNING THE APPLIANCE OFF
A=er turning the appliance OFF using the POWER buAon, the fan will con6nue to run for
a short period of 6me. This is a normal procedure and helps to cool & protect the
internal components.
During this period, DO NOT remove the appliance from the electrical socket outlet; wait
for the fan to stop running.
WATER FULL ALARM
Once the condensate tank is FULL the alarm will sound ten 6mes and the WATER FULL
LED will illuminate. The appliance will stop dehumidifying automa6cally. The
dehumidifying process will only restart once the condensate tank and been emp6ed and
re-­‐installed. Once re-­‐installed correctly the LED will turn off. DO NOT aAempt to modify
or remove the float mechanism; this could result in the tank overflowing.
THERMAL SAFETY PROTECTION
This appliance is fiAed with an internal heater as part of the dehumidifica6on process.
Should an overheat situa6on occur; the appliance will automa6cally power down. It is
important that the air intake and air outlet are ALWAYS clear of obstruc6ons to avoid
the appliance overhea6ng.
If the appliance shuts down due to thermal cut-­‐out; disconnect from the mains socket
outlet and wait for 15 minutes before re-­‐connec6ng the appliance to the mains socket
outlet and con6nuing with normal opera6on.