NeoQi Saltarium, Руководство пользователя

Страница: 22 / 50

22
Pull out the shaft. Clean it with small brush
from the salt remains. Look into the hole,
where was shaft and remove salt from there
too.
Be sure that all parts are cleaned and put
smaller part of salt generator back together.
Once a week you should clean mill and its
surrounding areas. At the same time be sure
that the small vertical pipe is in the correct
position. There is a hole on the shell of
vertical pipe. This hole should be directed
into the salt generator, it means that you
cannot see that hole in vertical pipe if you
look it from the outside.
Turn the bigger cover of the mill to the left.
Now pull out the thin vertical pipe and
remove lover part too, which one you just
turned.