Neopost SI60, Руководство пользователя

Страница: 31 / 87

31
4103241J-31/A
4103980D/A
28/05/2001
Operation
Subsequent to the check, to get back to the previous menu, press
on
ESC
.
For a more detailed check of the job content, select "MODIFY THE
JOB" and confirm with
OK .
Thus, you will go through the job definition by pressing on
OK
after each screen, until the END OF PROGRAMMMING MENU,
which offers the job storage selection. At any time, you may get
back to the previous screen, by pressing on the
ESC
key up to the
starting menu of the selected job.
2.1.4 Starting the job
Load the appropriate feeders with your documents and follow the
directions displayed on the control panel screen.
2.1.5 Modification of a job
Select "MODIFY THE JOB" and confirm via
OK
.
In order to modify the job, select the descriptions you feel
appropriate among the descriptions displayed. To do so, use the
selection keys and the confirmation key
OK
.
At every step of the modification procedure, you can get back by
pressing on
ESC
, in order to make different selections.
At the end of the modification procedure, the machine suggests you
to run a test cycle.
If the modification meets your requirements, you can store the job
either under the same number and the same name as the initial job