30
Perform a Test Run
To perform a test run:
1. Press
to display the “test run”
menu.
A message can appear: “Set manual feeding” or
“Set automatic feeding”. In that case:
a
Check if the daily mail handle is in the
correct position (see 3.8 ”Run the Daily
Mail” on page 30).
b
Correct if necessary.
c
Press the
button.
d
Press
again.
The “test run” menu displays.
2. Press
to load a new envelope into the insert position. This gives the
possibility to check and correct the insert position of the envelope (see ”Insert
Position” on page 28).
3. When the envelope position and the position of the fingers is correct, press
to load a folded sheet in the envelope.
The envelope will be sealed (when enabled, refer to 3.6 ”Sealing Envelopes” on page
26) and ejected to the conveyor stacker.
When finished testing start the job (see ”Starting the Job” on page 29).
3.8
Run the Daily Mail
To process documents or sets of documents, which can not be processed automatically
(e.g. stapled documents), the top feeder is equipped with a daily mail switch.
To switch to the daily mail function:
1. Select a job where the daily mail function has been set to on:
a
From the “main menu (1)”, press
.
b
Search for a job with the daily mail function using the arrows. The daily mail
function can be recognized by the
icon in the “job info” screen.
c
Press
to select the job and return to the “main menu (1)”
