Unpacking & set-up:
- Unpack your printer:
- Remove the printer and accesso-
ries from the packaging.
- Store the packing material in a
safe place.
- In the printer box, you should find the
following:
- 1 print-carriage cover
- 2 side guides
- 1 paper feed ramp
- 1 power cable
- 1 USB cable
- 5 HP cartridges
- 2 CD boxes (user sof-
tware and driver)
- Set the printer onto a level, stable
surface at least 20 cm from any walls
2
nd
step
Assemble the printer:
- Install the Fixed Side Guide using the
two screws [1] provided
5
th
step
Connect power to the prin-
ter
- Make sure that the main power switch
is in the OFF position.
- Plug the power cord into the receptacle
on the printer, located below the main
power switch.
- Plug the other end of the power cord
into a 220-230V/50 Hz grounded outlet
with a high quality surge protector.
1
st
step
- Install the Adjustable Side guide using
the two screws [2] provided.
- Attach the Rear Paper Support using
the two knobs [3] provided.
- Install the Rear Paper Guide using the
thumbscrew and washer [4] provided.
Do not turn the power switch on at
that time.
Please refer to the user guide for more
details.
3
rd
step
Install the inkjet car-
tridges
4
th
step
Set up the feed on the
printer
- Adjust the media side guides as
needed
- Adjust the rear media guide as needed
The printer uses two ink cartridges,
the C6657 Color cartridge and the
C6656 Black cartridge or C6658 Photo
cartridge.
Installing and replacing the cartridge is
done in the following manner:
- Adjust the sheet separation as needed
Quick Start Guide for the Printer AS-520C
01/02/2015 - A0001014/B
