NE-15
FM Radio
You can listen to FM stations. Stations can be tuned in manually, automatically, or from a preset memory storage.
Caution:
Before listening to the radio, please check that the FM antenna is correctly connected and adjusted for length and
direction.
Tuning in a Station
1. Repeatedly press the
SOURCE
button on the front panel of the unit “TUNER” is displayed on the display, or press the
FM
button on the remote control.
2. Tune in a station using one of the following methods:
Auto Tuning
If you press and hold the
PROG
button on the remote control,the display will show “AUTO” and the auto tuning will start.
Manual Tuning
Repeatedly press the Tuning Backward/Forward
D
/
C
buttons on the unit or press the
/
buttons on the
remote control to change the frequency until you find the station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the Preset
/
buttons on the remote control or press the
D
/
C
buttons on the unit to select
the desired preset number. Its band and frequency are displayed on the display.
Presetting Stations
You can manually preset up to 20 FM stations.
Tune in the desired station:
1. Press the
PROG
button on the remote control, the preset number will be displayed.
2. Press the Preset
/
buttons on the remote control or press the
D
/
C
buttons on the unit to select the preset
number.
PRESET
Increases the preset number by 1
PRESET
Decreases
the preset number by 1
Note:
If you select more than 20, the preset number will automatically change to “1” .
3. Press the
PROG
button again to store the station. The display will return to the broadcast frequency displayed.
4. Repeat the above steps 1 to 3 for each station you want to store in the memory with a preset number.
Note:
If the unit is unplugged or if a power failure occurs, the preset stations will not be erased .
To change the FM Reception Mode
Press the
REPEAT
button to select the Stereo or Mono channel to receive the best FM reception mode.
