3
ADVANCED INSTALLER SETTING
• Access
INSTALLER SETTINGS
Setting number
Description
1
Select gravity/pumped mode
2
Set 12 or 24 hours clock
3
Activation of auto Summer/Winter change over
4
Set the number of ON/OFF periods
5
Select your system between Z1/Z2 or CH/HW
Press simultaneously and
for
5 seconds
.
5 advanced settings can be modified.
Press
until correct option is in display then use or to select your
choice.
5 sec.
• Gravity/Pumped mode (1)
The pre-set system is
Pumped
.
2-
Then save by moving the pro-
gramming slider or save and go
to next setting by pressing
.
1-
Press or to change to Gra-
vity (2).
1 =
Pumped
2 =
Gravity
• Set 12/24 hours clock (2)
The pre-set value is
12
hours clock.
2-
Then save by moving the pro-
gramming slider or save and go
to next setting by pressing
.
1-
Press or to change to "24h".
• Auto Summer/Winter change over (3)
The auto Summer/Winter change over default is
ON
.
2-
Then save by moving the pro-
gramming slider or save and go
to next setting by pressing
.
1-
Press or to change to OFF
• Installation operating (5)
The digital programmer can manage Central Heating and Hot Water or
2 zones.
The pre-set choice is CH/HW.
Note regarding the Advanced installer settings:
If programming slider is
moved, it will save changes and exit installer mode.
2-
Then save by moving the pro-
gramming slider or save and go
to next setting by pressing
.
1-
Press or to change to Z1/Z2.
• Set number of ON/OFF periods (4)
You can adjust the number of ON/OFF switching time periods. The pre-
set number is 2.
1-
Press or to change to 3
periods.
2-
Then save by moving the pro-
gramming slider or save and go
to next setting by pressing
.
Move the 2 mode sliders to off
position.
Move the programming slider to
position.
x2
