PRG7
7 DAY TWO CHANNEL DIGITAL
PROGRAMMER
Pack contains ....................................................................................1
Installation ..........................................................................................1
Mounting of wall mouting plate .............................................................................1
Wiring .........................................................................................................................1
Mounting of the Programmer .................................................................................2
Installer settings .................................................................................3
Advanced installer setting ......................................................................................3
Technical specifications
...................................................................4
PRG7 NEO ENG FP V02 19 06 2015
1
INSTALLATION
INSTRUCTIONS
x2
Screw Anchor
x2
Screws
The digital programmer is fixed on the wall with the wall plate which is
supplied with the product.
MOUNTING OF WALL MOUTING PLATE
PACK CONTAINS
INSTALLATION
x1
Standard wall plate
x1
Programmer
WIRING
All wiring must be in accordance with IEE regulations. This product is for
fixed wiring only.
All electrical installation work should be carried out by a suitably
qualified Electrician or other competent person. If you are not
sure how to install this programmer consult either with a quali-
fied electrician or heating Engineer. Do not remove or refit the
appliance onto the backplate without the mains supply to the
system being isolated.
2-
Remove the wall plate from the
programmer.
1-
Unscrew the 2 screws under the
programmer.
x2
3-
Secure the wall plate with the
two screws provided using the
horizontal and vertical holes.
4-
In case of surface mounting,
a knock out area is provided
on the wall plate and on the
corresponding area of the
programmer.
