Neomatica ADM34, Руководство по эксплуатации

Страница: 6 / 17

Neomatica LLC”. Tag ADM34 ver..1.0 of 21.11.2022
3.2.1 Search of the tag in application «ADM BLE-Configurator»
•
Launch «ADM BLE-Configurator» application.
•
Make sure that the application has been given all the necessary permissions.
•
For correct operation, you need not only to permit the use of the «Geolocation» or «Location»,
but also to enable this function if it is disabled.
•
The tag will be found as soon as the next message is sent.
If the tag is not detected, press both buttons at the same time and hold them not less than 10-
15 seconds before the beep, then try detecting again.
Following parametrs are avaliable:
•
Model;
•
MAC-address;
•
RSSI
–level of received radio signal
•
The time passed since the last data mes-
sage was received