«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019
10
Fig 5. ADM33. Use of normally open contact elements for lockup
Fig. 6. ADM33. Use of normally closed contact elements for lockup
4.2.
Immobilizer operation with the tracker ADM333BLE
The immobilizer is managed by the tracker. The setting of interaction between the
immobilizer and the tracker ADM333 BLE (hereinafter referred as tracker) is performed by
sending commands to the tracker via Bluetooth, GPRS and SMS.
4.2.1.
Connection of immobilizer to the tracker
BLEOUTADDR
command allows adding MAC-address of the immobilizer as well as
looking through the list of added addresses. Immobilizer MAC-address is given on the sticker
of the immobilizer body. When entering the address, no need to put a colon.
BLEOUTADDR X — add the address X;
BLEOUTADDR X,0 —clear the box X;
BLEOUTADDR — display the list of addresses added in the tracker.
