Neoline G-TECH X5x series, Руководство пользователя

Страница: 12 / 25

12
Power Connection
Only use power cable included in the product delivery set to supply the device.
Connect power supply wire in accordance with the diagram. Red (plus) wire should
be connected to +12V terminal where voltage does not disappear after ignition is
keyed off.
Connect yellow wire to ACC +12V or to other connector where voltage will disappear
after ignition is keyed off.
Connect black (minus) wire with the motor car body.
Connect cable into supply cable connector of the main Lock.
[ Operation ]
Preparation of the device
A. Insert MicroSD card into the
memory card slot.
Switch off the device before memory
card installation and insert memory
card until it is fully fixed.
Position MicroSD card against the
slot as shown on figure below and
insert until it goes click.