Neoline G-Tech X27, Руководство пользователя

Страница: 9 / 15

16 17
The duration of the video can be 1/3 minutes. It is recommended to
set the cycle for 3 minutes in the Settings.
When there is no space left on the memory card to record new
videos, the device automatically replaces old video files with the new
ones, except those that are locked from deleting.
Videos recorded in Cyclic recording mode are stored in the Normal
folder.
Emergency recording
It is designed to protect the current video file from being recorded
over and deleted. In order to protect the current video file, press the
OK button during video recording, and the recorded video file will be
marked with a special label that will prevent the device from deleting
and recording over this file. The corresponding icon will be displayed
on the screen.
Emergency recording is automatically activated when the G-sensor
triggers (sudden acceleration, deceleration) or collision. The
emergency recording is automatically locked to prevent deleting
during cyclic recording. Such files are stored in the Event folder.
Firmware Upgrade
- Download the file with the firmware from the official website www.
neoline.com, extract the file from the archive.
- Format the memory card and transfer the unzipped file to the
micro SD card.
- Insert a memory card with the downloaded file into the DVR slot.
- Connect the device to a power source.
- The status of the firmware update will be displayed on the screen.
- After the process is completed, the device will automatically
reboot.
- Check if the correct firmware version is displayed in the Settings
menu.
- Format the memory card using the DVR menu.
Attention! Do not turn the DVR power off while updating the
firmware.
Parking mode
When this mode is activated, recording will automatically start every
time the device detects a shake / impact, even if the device is turned
off. You can enable / disable this function via the Settings menu in
the Parking mode section. Files recorded in the parking mode are
stored in the Parking folder.
Play / delete files
Playing files
- Press MODE button in a standby mode
- Choose a video for playing from Event or Normal folder using the
Up / Down and Confirm buttons.
- Use the Up / Down buttons to select the file you want to view and
press the Confirm button to start playing.