Neol ePowerSwitch 4 IEC R2, Руководство пользователя

Страница: 5 / 52

4
Part I : Description
ePowerSwitch 4IEC is an extension lead that enables remote power control over IP or locally through an
RS-232 Terminal connection.
The built-in mini Web server allows individual control of the four sockets, using a browser.
Its serial interface can be used to control the power outlets over a Terminal connection (KVM Switch,
console server...) or to trigger a soft shutdown of a server with shutdown capabilities. An internal Real Time
Clock enables to trigger scheduled actions and timestamp all events (logs, SNMP traps and Syslog events).
ePowerSwitch 4IEC is more than a simple power strip. It offers IP device monitoring with automatic reboot
function in case of lock-up.
The ePowerSwitch 4IEC supports the TCP/IP, HTTP, DHCP, Syslog, SNMP Traps and SNTP protocols.
Diagram
1 2 3 4 S (LEDs)
1 to 4 Red. Status of power outlet 1 to 4 (On/Off)
S
Status
On = ePowerSwitch 4IEC software is loaded and functional
Off = power default
1 time repeatedly = power on but not ready
2 times repeatedly = waiting on IP address from DHCP server
4 times repeatedly = System error (contact the manufacturer)
Network (RJ45 Connector)
Auto-Sensing 10/100 Mbits/sec Ethernet Port
Link (LED)
Off = Network connection not detected
On = Network connection detected
Flashing = the device is sending or receiving data over
this port
100 (LED)
Off = 10 Mbits/sec network connection
On = 100 Mbits/sec network connection
RS232 (SUB-D 9F Connector) RS232 serial port with
DB-9 female connector.
Pinout: 2 = TxD, 3 = RxD, 5 = Gnd)
This interface can be used to configure Network
Parameters, control Power Outlets and trigger a Soft
Shutdown of a Server.
Package list
The following items are included:

1 ePowerSwitch 4IEC

1 power cable, 230 V / 10 Amp, length 1.80 Meters

1 RJ45 M/M cable, 2 Meters

1 serial cable SUB-D 9 points M/F, 1.80 Meters

1 quick installation guide

Micro Terminal

1 CD with User Guide, Quick Start Guide, Datasheet and Windows configuration program
5 LEDs
1 - 4 = Status of outlets 1 - 4
S = Status
RJ45 Connector
Ethernet Network
SUB-D9F Connector
Terminal connection
4 Power outlets
230 VAC max 10 Amp
Power input cable
230 VAC – 10 Amp