1. DESCRIPTION
ePowerSwitch
*
1G
R2
is a power control unit with a built-in Web server, an Ethernet and a RS232
connection. It enables to control the power supply of 1 power outlet1s through an Ethernet connection.
This unit offers additional IP device monitoring. It has a Real Time Clock to trigger scheduled actions and
timestamp all events. Its serial interface enables to control the power outlet over a Terminal connection
(KVM Switch, console server...) and to trigger a soft shutdown of a server with shutdown capabilities.
The ePowerSwitch 1G
R2
supports the HTTP, DHCP, Syslog, SNMP and SNTP protocols.
1.1 Diagram
The front panel of the
ePowerSwitch 1G
R2
SUB-D9F Connector
Terminal connection
RJ45
Connector
LEDs
Status
Status of the outlet
LEDs
Out
Red. Status of power outlet 1 (On/Off)
PL Status
On = ePowerSwitch 1G
R2
software is loaded and functional
Off = power default
10/100 (RJ45 Connector)
Network connection 10/100 Mbits/sec
Green LED
Off = Network connection not detected
On = Network connection detected
Flashing = the device is sending or receiving data over this port
Yellow LED
Off = 10 Mbits/sec connection
On = 100 Mbits/sec connection
5
