Disable:
The alarm won’t be triggered upon detecting a motion
Instant: Activated when ARM/HOME ARM
When the NeoGuard Smart Home System is armed or in
Home Arm mode an alarm will be triggered as soon as a
motion has been detected
24 Hours: Activated even when DISARMED
An alarm will be triggered even if the system is disarmed
Home: Deactivated when DISARM/HOME ARM
An alarm will only be triggered if the system is armed; no
alarm will be triggered if the system is in Home Arm mode
Door Chime: No alarm but clanking
The sound of a doorbell will ring upon detecting a motion
Entry Delay: Wait few seconds before alarm
The alarm will be triggered only after a few seconds
upon detecting a motion
“Accessories Management” >
“Security Accessories” >
e.g. “MotionSensor2“
Remind: Trigger Beep On/Off:
If you activate the Remind feature a short beep will sound every
time the NeoGuard MotionPet detects a motion
TRIGGER MODES
NeoGuard MotionPet
Operating Voltage
DC 9V
Battery
1 x 6F22 9V battery
Operating Current
≤15mA
Power Consumption (Standby)
25μA
Detection Angle
110°
Detection Distance
9-12m
Pet Immunity
≤12kg
Transmission Distance
100m (without obstacles)
Transmission Frequency
433.29MHz
Working Temperature
-10˚C~50˚C
Relative Humidity
≤95%rh (non-condensing)
Weight
65.7g (without battery)
100.3g (with battery)
Dimensions (HxWxL)
106 x 62 x 46 mm
TECHNICAL SPECIFICATIONS
Balter Security GmbH
Elisabeth-Selbert-Str. 19
40764 Langenfeld
Germany
www.neoguard.biz
E-Mail: [email protected]