NeoGate TB400 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 28

NeoGate TB400 Скачать руководство пользователя страница 5

NeoGate TB400 User Manual

www.yeastar.com

5

2. System set up

2.1 Installation of BRI Module.

Open the case of NeoGate, adjust the pins to the slots and insert then insert
the spins into the slots.

Note1

: Please turn off the device when installing the modules.

2.2 Ethernet Line Connection

NeoGate provides two 10/100M Ethernet ports with RJ45 interface and LED
indicator. Plug Ethernet line into NeoGate’s Ethernet port, and then
connect the other end of the Ethernet line with a hub, switch, router, LAN or
WAN. Once connected, check the status of the LED indicator.

The green LED

indicates the port is properly connected.

2.3 Power Supply Connection

NeoGate utilizes the high-performance switch power, which supply the
enough voltage and electrical energy that required by NeoGate system.
AC Input: 100~240V
DC Output: 12V,1A

Please follow the steps below to connect the NeoGate unit to a power outlet:

1.

Connect the small end of the power cable to the power input port on the
NeoGate back panel, and plug the other end of the cable into a 100VAC
power outlet.

2.

Check the Power LED on the front panel. A solid green LED indicates that
power is being supplied correctly.

Downloaded from

www.Manualslib.com

manuals search engine

«
...
3
4
5
6
7
...
»

Содержание TB400





























Отзывы:

Нет отзывов