Neoclima Therminator 3.2 Series страница 67 Скачать руководство пользователя

Страница: 67 / 88



Page 28



Outdoor Unit

Installation

If you will install the unit on a wall-mounted

bracket

, do the following:

1.Mark the position of bracket holes based on

dimensions chart.

2. Pre-drill the holes for the expansion bolts.

3. Place a washer and nut on the end of each

expansion bolt.

4. Thread expansion bolts through holes in

mounting brackets, put mounting brackets

in position, and hammer expansion bolts into

the wall.

5. Check that the mounting brackets are level.

6. Carefully lift unit and place its mounting feet

on brackets.

7. Bolt the unit firmly to the brackets.
8. If allowed, install the unit with rubber
gaskets to reduce vibrations and noise.

If you will install the unit on the ground or

on a concrete mounting platform

, do the

following:

1. Mark the positions for four expansion bolts

based on dimensions chart.

2. Pre-drill holes for expansion bolts.

3. Place a nut on the end of each expansion bolt.

4. Hammer expansion bolts into the pre-drilled

holes.

5. Remove the nuts from expansion bolts, and

place outdoor unit on bolts.

6. Put washer on each expansion bolt, then

replace the nuts.

7. Using a wrench, tighten each nut until snug.

WARNING

WHEN DRILLING INTO CONCRETE, EYE
PROTECTION IS RECOMMENDED AT ALL
TIMES.

CAUTION

Make sure that the wall is made of solid brick,

concrete, or of similarly strong material.

The

wall must be able to support at least four

times the weight of the unit.

Outdoor Unit Dimensions (mm)

W x H x D

Mounting Dimensions

Distance A (mm)

Distance B (mm)

681x434x285 (26.8”x17”x11.2”)

460 (18.10”)

292 (11.49”)

700x550x270 (27.5”x21.6”x10.62”)

450 (17.7”)

260 (10.24”)

728x555x300 (28.66”x21.85”x11.81”)

452 (17.79”)

302(11.89”)

946x810x420 (37.21”x31.9”x16.53”)

673 (26.5”)

403 (15.87”)

720x495x270 (28.3”x19.5”x10.6”)

452 (17.7”)

255 (10.0”)

845x702x363 (33.25”x27.63”x14.29”)

540 (21.26”)

350 (13.8”)

700x550x275 (27.5”x21.6”x10.82”)

450 (17.7”)

260 (10.24”)

770x555x300 (30.3”x21.85”x11.81”)

487 (19.2”)

298 (11.73”)

800x554x333 (31.5”x21.8”x13.1”)

514 (20.24”)

340 (13.39”)

Содержание Therminator 3.2 Series

























































































Результаты поиска

Содержание Therminator 3.2 Series

Отзывы:

Похожие инструкции для Therminator 3.2 Series

Бренды по названию

Популярные бренды

Neoclima Therminator 3.2 Series, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание Therminator 3.2 Series

Отзывы:

Похожие инструкции для Therminator 3.2 Series

Бренды по названию

Популярные бренды