NEO Proton 12 HEX USB, Руководство пользователя, Страница: 12 / 30

PROTON 12 HEX USB
P. 12
ENGLISH VERSION
7. MASTER/SLAVE
OPERATION
When multiple PROTON 12 HEX USB units are used to-
gether,
Master/Slave mode
enables the assignment of
one master unit and multiple slave units. The master unit
can be operated in stand-alone mode
(i.e., auto program
or sound-active mode -- not DMX mode). The slave units
should all be set to slave mode as described below.
- Note: Slave units should be configured and connected
before linking to master unit.
SETUP AS BELOW:
Slave units:
1. Press MENU button until 6-CH or 11-CH is displayed
2. Press
ENTER
3. Set DMX address to d 1
4. Connect DMX cable from master unit to DMX In con-
nector Link following slave units in similar cable configuration.
Master unit:
1. Set to Auto or Sound-Active mode
2. Link to slave units, beginning from the master DMX
Out connector.
MASTER/SLAVE OPERATION
(via UFI- WIFI)
PROTON 12 HEX USB units can operate in Master/Slave
mode wirelessly using the optional UFI wi- transceiver. The
master UFI-enabled unit can be operated in stand-alone
mode, with the UFI set to transmit. The slave units should all