Chapter 3.0 The PowerSeries Neo Security System
3.3 Monitoring
This system is capable of transmitting alarms, troubles and emergency information. If you initiate
an alarm by mistake, immediately call the central station to prevent an unnecessary response.
Note:
For CP-01 systems, the monitoring function must be enabled by the installer before it
becomes functional. There is a communicator delay of 30 seconds in this control panel. It can be
removed, or it can be increased up to 45 seconds, at the option of the end-user by consulting with
the installer.
3.4 Maintenance
With normal use, the system requires minimum maintenance. Note the following points:
l
Do not wash the security equipment with a wet cloth. Light dusting with a slightly
moistened cloth should remove normal accumulations of dust.
l
Use the system test described in “Testing Your System” to check the battery condition.
We recommend, however, that the standby batteries be replaced every 3-5 years.
l
For other system devices such as smoke detectors, passive infrared, ultrasonic or
microwave motion detectors or glassbreak detectors, consult the manufacturer’s literature
for testing and maintenance instructions.
- 8 -
