Mercury Neo electric scooters
Part Code: Z40948 (Rev A)
Owner’s Handbook
Page 15 of 24
Cleaning the battery
If water, battery acid, dust or other substances contaminate the batteries, they will discharge quickly. The
batteries supplied with the Neo scooter are sealed and as such are maintenance free. Please follow the
steps below to clean the battery.
1. Switch the scooter OFF at the ignition.
2. Remove the seat and dust cover.
3. Remove the shroud.
4. Use a clean cloth to wipe off the soiled area.
5. Take out the battery.
6. Clean the battery with a clean cloth. If the terminal is covered by white powder, please wipe it clean
using a damp cloth.
Suggestions
1. Make sure the terminals are installed properly and put the cover back on.
2. Do not use the battery to charge telecom equipment or other items.
3. Battery efficiency will vary with outside conditions and the driving distances will be shorter in
the winter. If the vehicle is not used for a long time, please charge the battery at least every
week.
4. Replace both batteries together.
5. If necessary, ask for help from your dealer for advice about maintaining and replacing the
battery.
