15502-ML002 Rev01_ECN 6481_ENTAIN QUICK START GUIDE
Page 3 of 8
1.0 Unpacking Entain Kiosk
ATTENTION:
Prior to installation, refer to Chapter 1
– Safety Information in the Entain User Service
Manual.
Remove the strapping from the carton.
CAUTION:
The strapping is under tension and can
flick when cut.
Carefully lift and remove the outer carton, inner
carton, and protective packaging.
Ensure the internal packaging is free from damage.
Remove all packaging provided from the Kiosk
components.
CAUTION: DO NOT LIFT THE KIOSK USING THE
PLASTIC BAG.
Open the top of the plastic bag.
Carefully remove the Kiosk from the packaging by
sliding both hands through the “mouth” of the Kiosk
and lift in an upwards direction.
Position the Kiosk into the final location.
Remove all protective films from the Kiosk and
dispose.
Caution:
Kiosk weight = 26.5lbs (estimate).
The Printer is packaged in a separate carton within
the Entain packaging.
Carefully remove the Printer and Power Loom from
the carton.
Remove all protective films from the Printer and
dispose of waste.
For the
“Breadboard Kiosk” design, the Printer can
be installed on either the LHS or RHS of the Kiosk.
QUICK START GUIDE
CAUTION: Servicing of this product or unit is to
be performed by trained service personnel only.
DO NOT LIFT THE PRODUCT
USING THE BAG
Contents