15201
-
ML002 REV05 ECN 5847
Page 24
STEP 1 To remove the Proximity Sensor, press
the button on the side of the Top Lid to allow
the Top Lid to lift open.
STEP 3 Unclip the Proximity Sensor from the
retainer.
STEP 4 Remove the Proximity Sensor from the
Top Lid.
Remove & replace the Proximity Sensor.
To re
-
install the replacement Proximity Sensor,
follow Steps 1 to 4 in reverse.
4
Replacing the Proximity Sensor
1
3
2
STEP 2 The Proximity Sensor is located in the
rear of the Top Lid (when viewed from the
Teller side).
Proximity Sensor
Chapter 12
-
Proximity Sensor
Retainer
CAUTION: Servicing of this product or unit is to be
performed by trained service personnel only.