NEO TOOLS 90-060, Перевод оригинальной инструкции, Страница: 5 / 47

EN
TRANSLATION OF THE ORIGINAL INSTRUCTION
FAN HEATERS
90-060 / 90-061
NOTE: BEFORE THE EQUIPMENT IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE
REFERENCE. PEOPLE WHO HAVE NOT READ THIS INSTRUCTION SHOULD NOT ASSEMBLE, LIGHT, ADJUST OR OPERATE THE UNIT
DETAILED SAFETY REGULATIONS
ATTENTION!
Read carefully-The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can
be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to person and keep installation time to
a minimums.
1.1 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
1.2 WARNING: In order to avoid overheating, do not cover the heater.
1.3 Children of less than 3 years should be kept away unless continuously supervised.
1.4 Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended
normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
1.5 CAUTION -some parts of this product can become very hot and cause burns. Particular attention has to be given where chi ldren and vulnerable
people are present.
2. Introduction
2.1 Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building sites or greenhouses
depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air temperature
and controls the surrounding temperature. The fan motor is controlled by thermostat and it stops working when the thermostat cuts off the heating
element. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating.
2.2 When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time.
3. Technical specific ations
Model 90-060 90-061
Waterproof of Class NA NA
Voltage 220-240V~ 220-240V~
required power 2000W 3000W
current 8.3 - 9.1A 12.5 - 13.6A
Setting 20/1000/2000W 7/2000/3000W
Manual reset Thermostat 65°C 65°C
Product meast (mm) 210×130×260 234×130×284
N.W.(KG) 1.45 1.47
3.1 Housing of steel plate and coated by heat-resistant powder .
3.2 Supplied complete with cord and plug .
4. Description of Control Panel
90-060 90-061
4.1 Left Knob : selector with heat setting
the device is turned off
fan on
the heating element works at half power
the heating element is working at full power)
4.2 Right Knob : Thermostat dial
5. Special safety regulations
5.1 Before use, please check the marking on the power cord. Depending on the power cord type this appliance may be used in different ambient
conditions:
Type You can use the appliance in Do not use in
H05VV -F household, warehouses and workshops, building sites or greenhouses building sites or greenhouses
H07RN -F household, warehouses and workshops, buil ding sites or greenhouses
H05RN -F household, warehouses and workshops or greenhouses building sites
H05RR -F household, warehouses and workshops building sites or greenhouses
5.2 When using electrical appliance basic precautions should always be followe d including below:
5.2.1 The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.