NEO TOOLS 75-200, Инструкция по эксплуатации

Страница: 19 / 100

neo-tools.com
19
Intermediate measurement (double Pythagorean with adding)
The measurement uses three points.
1. Repeatedly press the measurement mode button until the display
shows flashing symbol .
2. Press the button to start laser measurement.
3. Press the measurement button and make the measurements in
accordance with the on screen instructions and figures below. After making
three measurements the device will automatically calculate measured
height and will display the value on the main screen.
4. After measurement the laser light switches off automatically.
2
1
3
Storage of measurements
Measurement results are automatically stored in the device memory. To display
stored results, press MEAS button and hold until screen backlight switches on.
Press the MEAS button again to display measurement value.
Technical specification
Battery 2 x AAA 1.5 V
Measurement mode Length meas.
Continuous meas.
Area/volume meas.
Indirect length meas.
Measurement range 0.03–60 m
Unit m/mm/in/ft
Measurement reference base Front/rear
Laser device Laser light
Wavelength 650 nm
<1 mW, class II