NEO TOOLS 75-107, Инструкция по эксплуатации

Страница: 5 / 24

neo-tools.com neo-tools.com
5
EN
ORIGINAL MANUAL (INSTRUCTION)
CROSS LINE LASER
75-107
CAUTION: Before using the device read this manual carefully and keep it for future reference. Failure to follow
safety rules from this manual may cause tool damage or body injuries.
WARNING: Do not look directly at the source of laser beam.
Follow the below safety rules.
1. Do not modify the device.
2. Use the laser device in accordance with the manufacturer’s instructions.
3. Do not intentionally point the laser beam at people or animals.
4. Do not point the laser beam at bystanders’ or animals’ eyes. Laser radiation may damage your vision.
5. Always make sure the laser beam is not directed at reflective surfaces. Reflective surface may project the beam at operator
or bystanders.
6. Do not allow children to operate the device. Do not allow children in the workplace when setting up and using the device.
7. When not in use, store the device in a dry place, beyond reach of children.
8. Do not replace the laser unit with device of other type. All repairs must be carried out by the manufacturer service.
9. The tool is equipped with class 2 laser device compliant with EN 60825-1:2014.
INTENDED USE
The device is used for precise setting of horizontal and vertical lines. The device has laser lock feature that allows to set
up straight lines at any chosen angle.
Observe the following instructions when working for the best device operation. Use other than described below is not allowed
and may cause damage to the product.
Cross Line Laser 75-107
Parameter Value
Self-levelling accuracy ± 0.3 mm/m
Self-levelling range 3,5°
Range 20 m
Operation time up to 5 hours
Operating temperature 0°C – 50°C
Storage temperature -20°C – 70°C
Stand thread ¼ ”
Laser class 2
Laser wavelength 520 – 530 nm
Laser power < 1 mW
Battery type 3 AA 1.5 V batteries
Protection level IP 54
Dimensions 92 x 84 x 50 mm
Weight 330 g
EXPLANATION OF USED SYMBOLS
1 2 3 4
1. Caution, laser radiation!
2. Caution, laser radiation – do not look in the laser beam
3. Read the instruction manual, observe warnings and safety conditions therein.
4. Segregated waste collection