Neo HD Dash Cameras, Руководство пользователя

Страница: 18 / 24

18
NEO HD
Event Set-up

Event- Emergency/Impact /Over speed /Sudden deceleration /Sudden acceleration
*Parking: if car is not moving for 10minutes, recording frame rate reduced to 5frames at normal
status. It returns to previous setting when car is moving or shock or even passenger get on the
car.

Frame : Pre-alarm: 2~6 seconds recording before event occurs (only for 1FPS setting in normal )
Post-alarm:2 ~30 seconds recording after event occurs.

Over speed- Set up the over speed monitoring system. Once the over speed limit has been
exceeded, the device will begin recording. Km or Miles will be shown according to your chosen on
System.

Impact : Applying G-Sensor’s sensibility

Storage capacity of the event – Set each percentage for both Normal data and Event data.

Caution
Whenever the setting for the storage capacity of event is
changed, SD card always is to be freshly formatted. Please
noted this caution and back up the important recorded data
before changing the setting.