neno Mare, Руководство пользователя

Страница: 16 / 20

6. ASSEMBLING THE DEVICE
Sanitizing the breast pump in boiling water
1. Fill a pot with water and heat it up. Remember to pour enough water to fully cover all elements of the breast pump.
2. Bring the water to boil.
3. Soak the accessories of the pump in boiling water for 10 minutes.
4. Take the elements out and let them air-dry.
5. Store the breast pump and elements in a dry place.
Cleaning the pumping device
Clean the pumping device using a damp cloth to prevent accumulation of dust on the device. Do not immerse the device
under water and do not wash it under running water. Do not use abrasive materials and chemicals to clean the device.
Before each use, make sure that all elements of the set are clean, dry, and not damaged.
16
5. If you want to express milk from two breasts at the same time, repeat the 1-4 steps for the second set of elements
included in the kit.
1. Place the membrane and the
membrane lid on the connector
3. Put the valve in the connector.
Screw the milk bottle to the
connector clockwise until it sits
tightly in place
4. Connect the tube to the membrane
lid and to the corresponding port on
the pumping device.
2. Place the breast shield
on the connector
1. 2.
3. 4.