3.
Place the bubble unit base in the corner against the wall and remove the lid to place the
bubble unit as centrally as possible in the base on the floor. PLEASE NOTE: the bubble unit is
fragile especially at the attachment of the tube to the foot. Moving, bumping or lifting while
it is filled can lead to breakage which is not covered by warranty conditions.
Connect the supplied adapter to the bubble unit. If applicable, also attach the adapter of the
optional fiber optics light source. If desired, place an approved junction box inthe platform
where you can insert both adapters. The cable of this junction box can be passed under the
platform. Now place the lid and gently slide it down over the tube. Make sure that the lid is
easily placed in the open. Optionally, you can reposition some fiberoptic wires or do not pass
through some wires and leave them as a spare at the bottom.
