NENKO 20325170, Руководство пользователя, Страница: 3 / 8

9. Use
1. Open the diffuser package and make sure all parts are present (see page 3).
2. Check for any obvious signs of damage, particularly on the Power Adapter and Power
Adapter Plug.
3. Place the diffuser on a flat surface, out of the reach of children.
4. Connect the Power Adapter Plug “L” to the Power Inlet “K”.
5. Connect the Power Adapter “J” into an appropriate power outlet.
6. Insert the Air Outlet Accessory “U“ into the Air Outlet “E”.
7. Insert the Splash Guard “F” and align the notch
1. Use the supplied Water Cup to add mineral or tap water.
2. Remove the Glass Lid and add water into the Water Reservoir until it reaches the red
Maximum Water Level Indicator.
3. Add several drops of your favorite essential oils into the Water Reservoir.
4. Replace the Glass Lid.
5. Turn the diffuser unit ON using the remote control and select the desired setting (the
remote control operates up to 7.6 meters from the diffuser unit). Alternatively, press the
Power Button to turn ON the diffuser and press repeatedly to cycle through the light setting.
See diagram in LED section in Remote Control Feature for LED cycles.*
6. If the Audio On/Off button is selected on the remote control, a selection of soothing sounds
will play and the lights will turn ON
When Power Button is pressed to turn on the diffuser, diffuser will auto shutdown until water is
used up or turns off at time settling selected by Remote Control. Or press Power Button for 2
seconds to turn off the diffuser.
Remote Control Battery Installation