Operating the Floodlight
Switching the Floodlight On or Off
♦
The left button is used to turn the Floodlight On/Off and to
change the light intensity levels. There are five light intensity
levels.
♦
Pressing the left button for two seconds will turn the Floodlight
ON. If the outer light ring circling illuminates GREEN, this
indicates that the battery is sufficiently charged. The outer light
ring circling will illuminate RED when the battery is 20%
charged or less. If the outer light ring starts flashing RED, this
means that battery power level is too low and it needs to be
recharged.
♦
Pressing the left button for two seconds will also turn the
Floodlight OFF.
Changing the Light intensity levels
♦
The default light intensity of the Floodlight is set to 20% when
you first switch ON the Floodlight.
♦
Press the left button to switch through the five light intensity
levels [20%-40%-60%-80%-100%].
♦
When you press the left switch after 100% light intensity it will
revert back to the lowest light intensity, 20%.
Changing the Light modes
♦
There are three Light modes:
o
Wide-angle white LED Floodlight
o
UV light
o
White floodlight and UV light
♦
The right button is used to change among the three Light
modes. When you first turn ON the Floodlight (using the left
button) the Floodlight will be in the wide-angle white LED
floodlight mode.
♦
Press the right button to turn on the UV light mode.
9
