The batteries begin charging as soon as they are connected to the
charger, and stop charging as soon as they are full.
⬥
A steady red light on the battery charger indicates that
the battery is charging.
⬥
A steady green light on the battery charger indicates that
the battery is fully charged.
Note: The battery is equipped with an NTC temperature
controller that only allows it to be charged when its
temperature is between 32˚ F - 113˚ F ( 0˚C- 45˚C ,
ensuring a long battery service life.
Inserting the Batteries into the Floodlight
1.
Ensure the 3-prong connector is in alignment with the
3 holes on top of the battery.
2.
Insert the battery into the bottom of the floodlight
base.
Caution: Use only a Li-ion battery from the original
factory with the voltage listed on the nameplate of your
drill. Using other batteries not suitable for the drill can
lead to malfunctions, cause damage to the power tool,
and pose a fire hazard.
Removing a Battery from the Floodlight
Pull the battery pack out and down, without exerting any force.
8
