GUARANTEE
NEMO QUALITY
RECOMMENDED
INNOVATIONS
NEMO PRODUCT
TECHNOLOGY
POLE SUPPORTED
TECHNOLOGY
AIRSUPPORTED
EXTREME CONDITIONS
EXTREME CONDITIONS
POLE SUPPORTED
TECHNOLOGY
EXTREME CONDITIONS
STATISTICS
NEMO PRODUCT
ACCESSORIES
NEMO PRODUCT
®
SETUP GUIDE
NEMO PRODUCT
Note: To easily install the Bungalow™ Garage™, start
with the fly off the tent.
1. Connect hooks around
webbing located on top
of tent.
2. Attach webbing with
grommet at each end of
the same ridge pole.
3. Insert pole through pole
sleeve and insert ends into
grommets on webbing
strap.
4. Stake out front points.
Stake out side anchors
(optional).
5. Roll back tent fly tucking
it under itself to allow
water to shed off tent and
garage without pooling or
leaking.
1. Connect hook around webbing located at center hub of tent.
2. Attach webbing grommets to pole tips at the end of front ridge
pole.
3. Insert pole through ploe sleeve and insert ends into grommets
on webbing strap
4. Stake out front points, side anchors are optional.
5. Roll back tent fly tucking it under itself to allow water to shed off
tent and garage with out pooling or leaking.
1. Connect hook around webbing located at center hub of tent.
2. Attach webbing grommets to pole tips at the end of front ridge
pole.
3. Insert pole through ploe sleeve and insert ends into grommets
on webbing strap
4. Stake out front points, side anchors are optional.
5. Roll back tent fly tucking it under itself to allow water to shed off
tent and garage with out pooling or leaking.
1. Connect hook around webbing located at center hub of tent.
2. Attach webbing grommets to pole tips at the end of front ridge
pole.
3. Insert pole through ploe sleeve and insert ends into grommets
on webbing strap
4. Stake out front points, side anchors are optional.
5. Roll back tent fly tucking it under itself to allow water to shed off
tent and garage with out pooling or leaking.
1. Connect hook around webbing located at center hub of tent.
2. Attach webbing grommets to pole tips at the end of front ridge
pole.
3. Insert pole through ploe sleeve and insert ends into grommets
on webbing strap
4. Stake out front points, side anchors are optional.
5. Roll back tent fly tucking it under itself to allow water to shed off
tent and garage with out pooling or leaking.
1. Connect hook around webbing located at center hub of tent.
2. Attach webbing grommets to pole tips at the end of front ridge
pole.
3. Insert pole through ploe sleeve and insert ends into grommets
on webbing strap
4. Stake out front points, side anchors are optional.
5. Roll back tent fly tucking it under itself to allow water to shed off
tent and garage with out pooling or leaking.
