4
PERFORMANCE INSURANCE
PRODUCTION TOOLS
•
SHOW CONTROL
•
BACKUP SOLUTIONS
www.nemesis-research.com
CSC Preset
Button
Function
Message (Command)
1
Go
/cuelist/go
2
Stop
/cuelist/stop
3
Previous
/cuelist/prev
4
Next
/cuelist/next
5
Not used
OSCA-O4 Preset
Button
Function
Address
Integer Argument
1
Relay 1 ON
/relay/1
1
2
Relay 2 ON
/relay/2
1
3
Relay 3 ON
/relay/3
1
4
Relay 4 ON
/relay/4
1
5
All relays OFF
/relay/?
0
Advanced Mode – Buttons
By putting the device into advanced mode and navigating to the buttons menu the user can
specify custom messages (Commands) for each of your buttons. The OSCA can send up to two
arguments with each command. OSCA will automatically determine the format of the argument
based on the value. For example, 1 will be sent as an integer, 1.00 as a float and one as a string.
OSCA will also automatically read the entered OSC command (String) and determine what is the
address and argument(s). For further information please see
www.nemesis-
research.com/opensoundcontrol
A debounce time can be set per button in milliseconds. This is the time after the button is
released before it can be pressed again. (the default is set to 250ms)
OSCA has a maximum length for the command which is 192 characters.
You can then select which destination you would like this command to be sent to. Each button
can send up to two commands, with each command being sent to one destination. (To send the
same Command to 2 destinations send identical commands to each receiving device)
Firmware Update
If connected to the internet you can use the Firmware update page to install the latest firmware
from the Nemesis server.
Additional Information
Incoming OSC
OSCA will react to incoming OSC messages on the port specified.
e.g., /button/1 Will send the commands specified by button 1 as if button 1 had been pressed.
Power
OSCA can be powered by POE or 5v DC via the USB C port